| The RB450 is a five port ethernet router with serial port and power jack for OEM applications.
The RB450 includes a switch chip, which means that it’s five ports can be combined to function as a switch increasing port to port communication speed.
The RB450 series are your perfect wired router for installations where wireless interfaces are not required.
|PCB temperature monitor||No|
|CPU temperature monitor||No|
|Temperature range||-30C to +60C|
|RB4xx Series @300Mhz (Ethernet only test)||64 byte frames||512 byte frames||1518 byte frames|
- All throughput tests done with Xena Networks specialized test system and RouterOS v5, according RFC2544, with Ethernet frame sizes 64, 512, 1518 bytes.
Each board is tested with specified number of Ethernet interfaces, to ensure optimal load on hardware.
- Values in Italics indicate that the maximum possible throughput was reached, limited only by ethernet ports themselves.
- Test results show device maximum performance, and are reached using optimal hardware and software configuration, different configurations most likely will result in lower results.