banneratas

Home

Omnitik U-5HnD

omnitiikupa5hnd   OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas - the perfect companion for our SXT, or for any other 802.11 standard device.

Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal - or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it’s features

Box contains: OmniTik U-5HnD, mounting loops, PoE injector, power adapter

Product specifications

Details
Product code RBOmniTikU-5HnD
CPU speed 400MHz
RAM 32MB
Architecture MIPS-BE
LAN ports 5
Gigabit No
MiniPCI 0
Integrated Wireless Yes
Wireless standards 802.11a/n
USB Yes
Memory Cards No
Power Jack No
802.3af support No
PoE 8-30V
Voltage Monitor No
PCB temperature monitor No
CPU temperature monitor No
Dimensions 368x125x55mm
Operating System RouterOS v5 and above
Temperature range -30 .. +70C
RouterOS License Level4
Antenna gain 7.5dBi
Current Monitor No
TX power 26dBm

Performance test results

RBOmniTikU-5HnD 100M port test (400Mhz) RouterOS v6.0rc6  
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 194.0 127.3 117.0 496.1 40.3 495.2
Bridging 25 Bridge filter rules 53.7 35.2 52.3 221.9 40.3 495.2
Routing none (fast path) 183.7 120.5 117.0 496.1 40.3 495.2
Routing 25 Simple Queues 92.8 60.8 88.5 375.1 40.3 495.2
Routing 25 IP filter rules 37.5 24.6 38.4 162.6 37.6 462.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results