banneratas

SXT G-5HnD

sxt  SXTG-5HnD is a low cost, high speed 5GHz outdoor sector AP, with a Gigabit port, to fully utilize the capacity of 802.11n. At 25° degree beamwidth, you can conveniently create sector setups with a few client devices because this device comes with an AP license (Level4).

Complete with a ready to mount enclosure and built-in 16dBi antenna, the package contains everything you need to make AP, point to point link or CPE.

Package contains SXTG-5HnD, mounting loops, PoE injector, power adapter

Product specifications

Details
Product code RBSXTG-5HnD
CPU speed 400MHz
Architecture MIPS-BE
RAM 32MB
LAN ports 1
Gigabit Yes
MiniPCI 0
Integrated Wireless Yes
Wireless standards 802.11 a/n
USB 1
Memory Cards 0
PoE 8-30V DC on Ether1
Dimensions 140x140x56mm, 265g
Operating System RouterOS
Temperature range -30C to +70C
RouterOS License L4
Antenna gain 16dBi
TX power 26dBm
CPU AR7242
Max Power consumption 7W

Performance test results

RBSXTG-5HnD Gigabit Ethernet test (400Mhz) RouterOS v6.0rc6  
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 194.0 127.3 178.4 756.6 81.2 997.8
Bridging 25 Bridge filter rules 53.7 35.2 52.3 221.9 51.5 633.0
Routing none (fast path) 183.7 120.5 167.0 708.1 81.2 997.8
Routing 25 Simple Queues) 92.8 60.8 88.5 375.1 81.2 997.8
Routing 25 IP filter rules 37.5 24.6 38.4 162.6 37.6 462.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results